ACR Universal Remote Control Kit

For optimum searchlight performance

The ACR Universal Remote Control Kit consists of
the URC-102 Control Box and URP-102 Point Pad. The Control Box
handles ON-OFF functions and light rotation speed, while providing
optimum voltage for brightest performance. It can perform up to six
different duties including operating searchlights, winches and
various other devices. The Point Pad provides fingertip remote
control for the RCL-50/75/100 series searchlights. Up to three
remote Point Pad units can be installed in one system.

The Control Box
The ACR 1927 URC-102 Control Box is designed to
perform up to six different duties on searchlights, winches and
other electrical devices. It provides optimum voltage to ensure
brightest performance and long lamp life, regardless of boat system
voltage fluctuations. The control box is compatible with devices
requiring 12 VDC or 24 VDC operation.

The Point Pad
The ACR 9428 2nd Station Point Pad for RCL-75
Searchlight provides fingertip remote control for the RCL-50/75/100
series searchlights. Up to three remote Point Pad units can be
installed in one system.

The Point Pad communicates with the Control Box via standard
television type RG-59 coaxial cable. The connectors are standard
“F” type television connectors. The connector on the back of the
Point Pad is located in the center of the panel for ease of
installation. After the coax cable has been routed and the “F”
connectors attached to the coax cable, simply screw the “F”
connectors to the Master Controller and the Point Pad.

ACR 1927 URC-102 Control Box Features:

• Provides optimum voltage to ensure brightest performance and
  long lamp life
• Rotates and moves light assembly every 30 days from
  activation
• On-Off and light rotation speed control
• Can perform up to six different duties; ideal for searchlights,
  winches and other electrical devices
• Easily retrofitted to most servo-motor drives
• Compatible with 12 or 24VDC operation

ACR 9428 2nd Station Point Pad Features:

• Provides a second station switch
• Three mounting options: surface mount, flush mount, trim ring
  for use with older ACR control pads
• Includes: two-way splitter, 15′ coax cable and (4) F type
  connectors
• Up to three remote Point Pad units may be installed on one
  system